Revolutionary General Purpose Centrifuge Microprocessor Digital 5200 R.P.M Model No: T-8M

Revolutionary General Purpose Centrifuge Microprocessor Digital 5200 R.P.M Model No: T-8M

Category:

+Microprocessor base Square M S body duly powder coated. Double walled light weight ABS lid. Fitted with microprocessor based 2 lines 16 characters LCD pannel for 0-59 minutes countdown timer, digital rpm meter and programmable speed. controller.

General Parameters of T-8M

  • General Purpose Bench Top Laboratory Centrifuge Machine.
  • Heavy duty C.R.C. construction finished with powder coating.
  • Double walled ABS injection moulded lid which is light weight to avoid accident.
  • Inter lid lock and metallic centrifuge bowl for safety.
  • 2 lines of 16 character LCD display of r.p.m., R.c.f, set time and run time
  • Microprocessor based programmable speed control from 500 to 5200 r.p.m depending
  • upon the type of rotor and Digital timer (0-59 minutes)
  • Last test parameter recall and display automatically on LCD.
  • Low noise, smooth and soft start and stable Speed output.
  • Wide variety of rotors and reduction adopters available on demand at extra cost.

Technical Parameter

Max. Speed 5250 r.p.m
Max. RCF ‘g’ 3600
Max. capacity 400 ml.
Motor Universal Motor (fitted with carbon brushes)
Power AC 220V 50 Hz ±10%
Dimension of Machine: L = 415mm, W = 360mm, H = 305mm
Dimension of outer box. 510 x 510 x 390 mm
Nett Weight 21kg. Approx. Gross Weight with box = 23.5Kg

Price of machines are without Rotor Head which can be selected by customer as per their specific
requirement from variety of rotors as under at extra cost :

Rotor Type Rotor Capacity Speed R.P.M Max. R.C.F ‘g’
Swing Out 16x15ml. 4400 2750
Swing Out 12x15ml 4400 2750
Swing Out 8x15ml. 5200 3000
Swing Out 6x50ml. 4000 2850
Swing Out 4x50ml 4400 2750
Angle Heads 16x15ml. 5250 3600
Angle Heads 12x15ml. 5250 3600
Angle Heads 8x15ml. 5250 3600
Angle Heads 6x50ml 5250 3600
Angle Heads 4x50ml. 5250 3600
Angle Heads 4x100ml. 4000 2850
Angle Heads 24x15ml. 4000 2850
Angle Heads 24 Vacuutainers 4000 2850

The above mentioned rotor heads are completed with S.S. tube carriers, suitable Glass/PVC
centrifugal tubes, head puller, spanner and rubber cushions.
Note:
i) The speed of the machine depends upon the type of rotor being used. If rotor is heavy the
speed will reduce as per above mentioned table.
ii) This is our general purpose leaflet. We can amend technical features according to the requirement
of customer but with our prior consent on our letter head.

Reviews

There are no reviews yet.

Be the first to review “Revolutionary General Purpose Centrifuge Microprocessor Digital 5200 R.P.M Model No: T-8M”

Your email address will not be published. Required fields are marked *